Conform to EN345 S3 HRO Class 2 Chainsaw Protection 24 m/s

Water Resistant full grain leather with 'Aquastop' membrane lining means these chainsaw boots are waterPROOF and 'breathable'! Gives performance close to Goretex Chainsaw boots (in terms of waterproofness) at a much lower price! Chainsaw protection is Class 2 so better than most others. This feature (the breathing bit - not the protection against chainsaw injury!) is greatly enhanced by wearing the right socks e.g. our J/MODSOX. Like all Treemme boots they are also remarkably trouble free. Weight (size 44) - 2.728 kg.

Steel toecap and midsole, scuff cap, anti-static leather insole, antistatic, wear-,oil-, heat-,and slip resistant rubber 'Hiker' cemented soles.

Click on image for the bigger picture.

Click on link below for catalogue page of chainsaw boots.

Chainsaw boots

People who bought this item also bought:

1. Class 1 Chainsaw Gloves (Ref: X/BUCHERON)

2. Standard Forestry Helmet (Ref: XS/FHELM)

3. Whistle (Ref: X/WHISTLE)

Related products:

1. Arblite Truflex Lightweight Chainsaw Trousers (Ref: XA/ARBTFLEXTRC)

2. Arblite Truflex Lightweight Protective Chainsaw Jacket (Ref: XA/ARBTFLEXJKT)

3. Standard Forestry Helmet (Ref: XS/FHELM)

Conform to EN345 S3 HRO Class 2 Chainsaw Protection

Water Resistant full grain leather upper and split leather lining.Steel toecap and midsole, anti-static leather insole, antistatic, wear-,oil-, heat-,and slip resistant rubber 'Hiker' cemented soles. NOW HAVE ANTI-SCUFF TOE CAP.

Click on image for the bigger picture.

Click on link below for catalogue page of chainsaw boots.

Chainsaw Boots

People who bought this item also bought:

1. Arblite Lightweight Protective Chainsaw Jacket (Ref: XA/ARBLITEJKT)

2. Class 1 Chainsaw Gloves (Ref: X/BUCHERON)

3. Small Forestry First Aid Kit in belt pouch (Ref: QM/70160)

Related products:

1. Class 0 Chainsaw Glove (Ref: XS/CSG)

2. Standard Forestry Helmet (Ref: XS/FHELM)

3. Arblite Lightweight Chainsaw Trousers (Ref: XA/ARBLITETRA)

Conform to EN345 S3 HRO Class 2 Chainsaw Protection

Water Resistant full grain leather upper and split leather lining.Anti scuff toe cover. Steel toecap and midsole, anti-static leather insole, antistatic, wear-,oil-, heat-,and slip resistant rubber 'Hiker' ideal stitched soles.

Probably the hardest wearing boot available! The original Treemme chainsaw boot.

Sizes 14 and 15 (49 & 50) are Special Order Items

Click on image for the bigger picture.

Click on link below for catalogue page of chainsaw boots.
Chainsaw Boots

People who bought this item also bought:

1. Arblite Truflex Lightweight Chainsaw Trousers (Ref: XA/ARBTFLEXTRC)

Studs to be fitted to soles of all three models of Treemme chainsaw boots (1202, Aquastop and Woodcutter) FROM NEW for enhanced grip in slippery conditions

People who bought this item also bought:

1. Arblite Lightweight Chainsaw Trousers (Ref: XA/ARBLITETRCa)

2. Treemme "Aqua Stop" Chainsaw Boots (Ref: X/TRE91202)

3. G-Wax Leather Proofing (Ref: J/PG-WAX)

Related products:

1. Treemme "Aqua Stop" Chainsaw Boots (Ref: X/TRE91202)

2. Woodcutter Chainsaw Boots (Ref: X/TRE39/2)

3. Treemme Orange Chainsaw Boots (Ref: X/TRE1202)

Conform to EN345 S2 Class 1 Chainsaw Protection.

Our (?the) lightest chainsaw boots at 2.326 kg including STEEL toe cap - NOT composite (plastic).

Water Resistant leather uppers - very flexible and comfortable!

NEW 2008 Low profile anti-scuff toe cover. Secura care foot supporting insole.

NEW 2008 sole pattern for extra grip.

Click on link below for catalogue page of chainsaw boots.

Chainsaw Boots

People who bought this item also bought:

1. Design A Chainsaw Bib and Brace (Ref: X/FFBBDA.S)

2. Class 0 Chainsaw Glove (Ref: X/CSGBM)

Related products:

1. Treemme Orange Chainsaw Boots (Ref: X/TRE1202)

2. Woodcutter Chainsaw Boots (Ref: X/TRE39/2)

3. Treemme "Aqua Stop" Chainsaw Boots (Ref: X/TRE91202)

EN345 PT.2 SB/P

Hunter Hand Built Class 3 Rubber Chainsaw Boots. Unique latex dipped construction - no internal seams. Steel midsole as well as 200 Joule toecap. Heat and oil resistant outsole. Anti-bacterial lining. Can be specially ordered with tungsten studs fitted.

People who bought this item also bought:

1. Standard Forestry Helmet (Ref: XS/FHELM)

2. Class 0 Chainsaw Glove (Ref: XS/CSGso)

3. Arblite Truflex Lightweight Chainsaw Bib and Brace (Ref: XA/ARBTFLEXBBC)

Hunter Forester 3000 Thigh Wader to EN345. Class 3 Chainsaw Protection. Please note that the chainsaw protection is as in the standard boots and not the wader part so chainsaw trousers are also required!

People who bought this item also bought:

1. Road Works Sign - 750 mm (Ref: U/RWORKS)

2. Mark Two 750mm Tripod (Ref: U/RTRIPOD)

3. Hedge Cutting Supplementary Sign (Ref: U/RHEDGE)