Multi layer heat / cold resistant gloves. Size 9. 32 cms long. Seamless knitted liner. Good grip. Good resistance to oil, greases and hydrocarbons. Good mechanical strength EN388 2332. Resistant to heat (250°C) EN407 X 2 XXXX. Protection against cold EN511 12X. Used in rubber industry, automotive, steam cleaning, boiler room, freezers.

People who bought this item also bought:

1. Perfect Fit Nitrifit Black Gloves 2232231 (Ref: TB/NITRIFITBLK)

2. Water repellent leather gloves 2055700 (Ref: TB/HYDRATEXLONG)

3. MAPA Ultrane Plus 559 Fully Coated Dyneema Anti-cut Gloves (Ref: SM/559ULTPLUS)

PVA and Neoprene gloves. 37 cms long. 1.5 mm thick. Cotton supported interior. Suitable for handling chemicals and biological materials. Good mechanical strength and some resistance to heat (100°C). The only gloves on the market tested against all 12 chemicals specified in EN374 and the 3 gases in EN943-2. Uniquely for a PVA (PolyVinyl Alcohol) glove the TopChem can also be used in water and aqeous solutions. This uniqueness is protected by patent (pending).

EN374- Specific Chemical Protection - A (Methanol), B (Acetone), C (Acetonitrile), D (Dichloromethane), E (Carbon Disulphide), F (Toluene), G (Diethylamine), H (Tetrahydrofuran), I (Ethyl acetate), J (n-Heptane), K (Sodium Hydroxide 40%), L (Sulphuric Acid 96%) and Micro-organisms.

EN407 - Heat and Fire X1XXXX Handling of hot parts up to 100°C

EN388 - Mechanical Hazards - Abrasion Resistance 3, Blade Cut Resistance 1, Tear Resistance 4, Puncture Resistance 1

CE Category 3

Specific uses - Use in association with a chemical protective suit, Formulation and mixing of inks and paints, Cleaning pumps, filters and tanks, Cleaning printing rollers, Production and handling of resins and composites, Treating metals with solvents, Manufacturing of polyurethanes, Stripping with methylene chloride.

Green Nitrile Rubber. Cotton supported interior. Embossed surface for grip. Suitable for handling chemicals and biological materials. Good mechanical strength and some resistance to heat. 355 mm long. 0.85 mm thick.

EN374- Specific Chemical Protection - J (n-Heptane), K (Sodium Hydroxide 40%), L (Sulphuric Acid 96%) and Micro-organisms.

EN407 - Heat and Fire X1XXXX Handling of hot parts up to 100°C

EN388 - Mechanical Hazards - Abrasion Resistance 3, Blade Cut Resistance 1, Tear Resistance 3, Puncture Resistance 1

Alternative to Ansell Sol-Knit 39-122 or 39-124

People who bought this item also bought:

1. HiViz Bodywarmer EN 471 Class 2. (Ref: M/HVBW)

2. 4457 - Pesticide (Ref: 896)

3. Bolle Attack Safety Goggles (Ref: B/BATTACK)

Blue Nitrile coated general purpose gloves. Brushed cotton inside. Knit wrist. EN 388 4111. Category 2.

People who bought this item also bought:

1. White mini centre feed rolls (Ref: VP/CFWH19.12)

2. Multifunction Cordura Contrast Trousers (Ref: KT/KPTR7330-07)

The entire reinforced nitrile glove provides excellent cut resistance. Liquidproof glove offering high protection against oils, aromatic or chlorinated solvents and micro-organisms. Flexibile and comfortable to wear, due to the use of multicoating technology. Anatomic shape, making it easy to put on and take off. Good thermal resistance: contact heat up to 100°C. Superior working life: high resistance to abrasion and puncture. Machine washable up to 5 times at 40°C - without compromising the glove characteristics. Good resistance to light exposure. 320 mm long.

EN374- Specific Chemical Protection - J (n-Heptane), K (Sodium Hydroxide 40%), L (Sulphuric Acid 96%) and Micro-organisms.

EN407 - Heat and Fire X1XXXX Handling of hot parts up to 100°C

EN388 - Mechanical Hazards - Abrasion Resistance 4, Blade Cut Resistance 5, Tear Resistance 4, Puncture Resistance 3 . This score takes a bit of beating!!

Size 9

People who bought this item also bought:

1. Cotton Drill Mens Glove (Ref: T/CODRILL)

2. MAPA Ultranitril 485 Gauntlet (Ref: SM/485ULTNIT)

3. Disposable PE overshoes (Ref: M/DISPOLYSHOE)

Green nitrile rubber gauntlet with embossed non-slip finish to palm and fingers. Chlorinated exterior and interior for ease of donning and doffing. Suitable for handling chemicals and biological materials. Good mechanical strength. Alternative to Ansell S/37-185 / 685 Solvex.

EN374- Specific Chemical Protection A - Methanol, J (n-Heptane), K (Sodium Hydroxide 40%), L (Sulphuric Acid 96%) and Micro-organisms.

EN388 - Mechanical Hazards - Abrasion Resistance 4, Blade Cut Resistance 1, Tear Resistance 0, Puncture Resistance 1

People who bought this item also bought:

1. Dry Powder Fire Extinguisher (Ref: P/DP2)

2. Protector Acetate safety visor (Ref: C/FL800A)

Green nitrile rubber gauntlet with non-slip finish to palm and fingers. Cotton flock lining. Suitable for handling chemicals and biological materials. Good mechanical strength. Alternative to Ansell S/37-675 Solvex.

EN374- Specific Chemical Protection - J (n-Heptane), K (Sodium Hydroxide 40%), L (Sulphuric Acid 96%) and Micro-organisms.

EN388 - Mechanical Hazards - Abrasion Resistance 4, Blade Cut Resistance 1, Tear Resistance 0, Puncture Resistance 1

People who bought this item also bought:

1. Disposable Vinyl Gloves (Ref: T/DISVINYL)

2. Drager X-plore Half Mask Chemical Respirator (Ref: ED/3300CHEM)

3. Bilsom Leightning Ear Muffs (Ref: HB/L1)

Nitrile/neoprene/natural rubber gloves suitable for clean room environments. Z pattern on palm and fingers.

EN374- Specific Chemical Protection - A Methanol), J (n-Heptane), K (Sodium Hydroxide 40%), L (Sulphuric Acid 96%) and Micro-organisms.

EN388 - Mechanical Hazards - Abrasion Resistance 1, Blade Cut Resistance 1, Tear Resistance 1, Puncture Resistance 0

People who bought this item also bought:

1. MAPA Ultrane 548 PU Foam Gloves Black (Ref: SM/548ULTB)

Lightweight knitted polyamide gloves with polyurethane foam coating to front palm and fingertips. Ventilated back. Fingertip precision for routine mechanical work or handling in high technology industries.

EN388 - Mechanical Hazards - Abrasion Resistance 3, Blade Cut Resistance 1, Tear Resistance 2, Puncture Resistance 1

WHILST STOCKS LAST - FOR ALTERNATIVE SEE PERFECT FIT WORK EASY

People who bought this item also bought:

1. MAPA Trionic 517 Clean Room Gloves (Ref: SM/517TRIONIC)

2. MAPA Ultrane 553 Nitrile Gloves (Ref: SM/553ULT)

3. MAPA Ultrane 551 PU Foam Gloves (Ref: SM/551ULT)

Lightweight knitted polyamide gloves with polyurethane foam coating to front palm and fingertips. Ventilated back. Fingertip precision for routine mechanical work or handling in high technology industries.

EN388 - Mechanical Hazards - Abrasion Resistance 3, Blade Cut Resistance 1, Tear Resistance 3, Puncture Resistance 1

People who bought this item also bought:

1. MAPA Ultrane 551 PU Foam Gloves (Ref: SM/551ULT)

2. MAPA Ultrane 553 Nitrile Gloves (Ref: SM/553ULT)

3. MAPA Ultrane 548 PU Foam Gloves Black (Ref: SM/548ULTB)

Lightweight knitted polyamide gloves with polyurethane foam coating to front palm and fingertips. Ventilated back. Fingertip precision for routine mechanical work or handling in high technology industries.

EN388 - Mechanical Hazards - Abrasion Resistance 4, Blade Cut Resistance 1, Tear Resistance 3, Puncture Resistance 1

Possible alternative to Perfect Fit Perfect Poly Black our reference TB/PERPOLY

People who bought this item also bought:

1. MAPA Ultrane 550 PU Foam Gloves - White (Ref: SM/550ULTW)

2. MAPA Ultrane 553 Nitrile Gloves (Ref: SM/553ULT)

3. MAPA Ultrane 548 PU Foam Gloves Black (Ref: SM/548ULTB)

Lightweight knitted polyamide gloves with black nitrile rubber coating to front palm and fingertips. Ventilated back. Fingertip precision for routine mechanical work or handling in high technology industries.

EN388 - Mechanical Hazards - Abrasion Resistance 4, Blade Cut Resistance 1, Tear Resistance 2, Puncture Resistance 1

Alternative to Perfect Fit Nitrifit,

People who bought this item also bought:

1. MAPA Ultrane 551 PU Foam Gloves (Ref: SM/551ULT)

2. MAPA Ultrane 550 PU Foam Gloves - White (Ref: SM/550ULTW)

3. MAPA Ultrane Plus 557 Dyneema Gloves (Ref: SM/557ULTPLUS)

Lightweight knitted Dyneema® and Elasthane gloves with PU foam coating to front palm and fingertips. Ventilated back. Fingertip precision for routine mechanical work or handling in high technology industries. Cut Resistant.

EN388 - Mechanical Hazards - Abrasion Resistance 4, Blade Cut Resistance 3, Tear Resistance 4, Puncture Resistance 3

ONLY AVAILABLE WHILST STOCKS LAST - Alternative is Perfect Fit Perfect Cutting White - our reference TB/PERCUTW or Perfect Cut Mix

People who bought this item also bought:

1. Perfect Fit Nitrifit Black Gloves 2232231 (Ref: TB/NITRIFITBLK)

2. MAPA Ultrane 553 Nitrile Gloves (Ref: SM/553ULT)

Lightweight knitted Dyneema® and Elasthane gloves with nitrile coating for excellent resistance to greases and oils. The first fully coated high dexterity anti-cut glove on the market. Fingertip precision for routine mechanical work or handling in high technology industries. Cut Resistant.

EN388 - Mechanical Hazards - Abrasion Resistance 4, Blade Cut Resistance 3, Tear Resistance 4, Puncture Resistance 3

Alternative to Perfect Fit Perfect Cutting White - our reference TB/PERCUTW

People who bought this item also bought:

1. Perfect Fit Nitrifit Black Gloves 2232231 (Ref: TB/NITRIFITBLK)

2. Water repellent leather gloves 2055700 (Ref: TB/HYDRATEXLONG)

3. MAPA TEMP PROOF Thermal Gloves (Ref: SM/333TEMPROOF)

Waterproof PVC fleece lined cold resistant gloves. 30 cms long. Good resistance to oil, greases and hydrocarbons. Good mechanical strength EN388 4221. Protection against cold EN511 121. High tec PVC formulation stays flexible even at -30°C. Protection against chemicals and micro-organisms EN374. Suitable for food contact. Used in fishing industry, food industries and logistics, road maintenance in freezing temperatues.